Strategic Test's Oscilloscope Cards are Optimized for RADAR Signals
Woburn, MA (PRWeb) February 2, 2007 -- Strategic Test has introduced the Multiple Recording option for its new UF2 family of 66 MHz PCI-based Oscilloscope/Digitizer cards. Primarily intended for recording RADAR signals, the MR option can be used to record any high-speed series of waveforms such as sonar, ultrasound and laser.
The Multiple Recording option allows an engineer to acquire a fast series of waveforms with a high repetition rate without restarting the hardware during the short dead time (usually only a few milliseconds) between waveforms. Since the option is implemented in firmware, the card re-arms itself and is ready for the next trigger event within four clock cycles, so that no event is missed.
For example, an oscilloscope card sampling at 200 MS/s configured to capture minimum segment sizes of eight samples leads to a maximum Pulse Repetition Frequency (PRF) of 16.6 MHz. Larger segments and/or slower sample rates reduce the PRF, as does the addition of a pre-trigger.
In addition, if the area of interest is located a specific time after the trigger event, a trigger delay can be programmed. The trigger source can be an external trigger event or one or several combined channel trigger events. Each channel has its own trigger detection with level, edge, re-arm, window and steepness trigger.
The price of the Multiple Recording option is 200 Euro and is an option available for all of the UltraFast 8-bit, 12-bit, 14-bit and 16-bit resolution Oscilloscope PCI cards. The cards are available with a choice of 2, 4, 8 or 16 channels per card depending on model. The option can be purchased with the card or it is possible to field upgrade the card at a later date.
About Strategic Test
With a product range of more than 150 high-speed Oscilloscope/ Digitizer, Arbitrary Waveform Generator and high-speed Digital I/O PCI, 3U PXI and 6U CompactPCI cards, Strategic Test is one of the leading suppliers of high-speed PC-based instruments. The UltraFast cards are designed at the R&D facility in northern Germany and distributed through our offices in Woburn, MA (USA) and Stockholm (Sweden).
The first high-speed measurement card for PCs was designed in 1989. The UF2 series based on the PCI-X 66 MHz/32-bit PCI bus is the forth generation and sets new standards in onboard memory size, data transfer rates and user flexibility. Strategic Test's clients include global electronics, semiconductor, defense, telecommunications and medical instrument companies, government funded research labs and universities in five continents.
A picture can be downloaded from the website at
www.strategic-test.com/news
Caption: UltraFast oscilloscope cards are optimized for RADAR signals
###
This press release has been reprinted from PRWEB per the terms and conditions of the copyright notice.
|
|
 |
 |
|
PCB waste water treatment solution strategy-PCB-electronics industry
With the State Environmental Protection intensity of macroeconomic policies and continued to increase environmental protection enterprises and public awareness and demand continues to increase, PCB wastewater treatment process technologies continue to spread and popularity of printed circuit industry, waste water will reach the standard expected soon .
Revealing Seminar - What's Not Covered In School, but What Every PCB Designer Should Know - To Be Offered By CA Design At the PCB West 2009 Confe
Utilizing a practical, real-life approach, PCB Design expert Robert Chandler of CA Design is offering an insightful PCB Design seminar focusing on both the principles of design and documentation at the PCB West 2009 Conference. Eight areas of PCB Design - not typically taught to engineers but that every PCB Designer should know - will be covered.
PCB industry to benefit in 3G development, Where-3G, PCB-screen special printing industry
The three basic telecom business in 2009 completed construction of 3G network direct investment 160.9 billion yuan to complete the construction of 325 000 3G base stations, the scale of construction over 10 years, half of the cumulative scale, creating a global telecommunications development in the history of building the largest and fastest growing construction the new record. There is no doubt that 2010 will be a year of great development of 3G users. Plate in the flourishing development of 3G, PCB industry, where it actually benefit from?
4th Dimension PCB Obtains ITAR Registration
4th Dimension PCB, Inc., a provider of printed circuit board (PCB) design services, announced today that it has obtained International Traffic in Arms Regulations (ITAR) Registration.
A Guide to PCB Design
Printed Circuit Board, or PCB, is layered insulator made from electrical conductors. Its designing is one aspect that requires reasonable knowledge and expertise; it can be a time-consuming and frustrating process. With right resources that provide details about the materials to be used, and the right technique required to treat the conductors, however, a good PCB design can be created.
China PCB products and manufacturing equipment - A printed circuit board, PCB-screen special printing industry
Order to cope with the serious negative impact on the financial crisis, the Chinese government to develop the revitalization plan of electronic information industry, to a certain extent, curbed the industry's decline. 2009 Frost & Sullivan expects Chinese demand for printed circuit board market will reach 97.21 billion yuan, down 18.2%; from 2010, with the apparent effect of various policies and restore consumer confidence, the market will re-growth.
Multilayer Printed Circuit Board Immersion Gold Process Control Brief - PCB, PCB-screen special printing industry
I. Introduction Process The purpose of Immersion Gold Process is deposited on the surface of the printed circuit color stability, good brightness, coating formation, good solderability of nickel gold plating. Basic can be divided into four phases: pre-treatment (degreasing, micro-etching, activation, after the dip), Nickel, Immersion Gold, post-treatment (scrap washed, DI water washing and drying).
CA Design Announces Instructor-Led PCB Design Training for Hewlett-Packard
Official PCB Layout Training Company for HP Worldwide, CA Design is Conducting Courses on Allegro PCB Layout and Constraint Management for HP employees March 9-12th in San Diego, CA.
|
 |
|
